Thursday, November 29, 2007

ATV Tire Chains

The best selection of ATV tire chains I have found on the Internet is at Tirechainsrequired.com. Four different options are available.

Super Stud diamond pattern is the most radical tire chain for ATV's I have ever seen. The diamond pattern design stays up on top of the tread for superior traction and the studs dig in to any off road surface you may encounter.

The A/T design also has the diamond pattern but with square links instead of studs. A more affordable option for those desiring a diamond pattern.

Their V-Bar option is offered in 4 link and 2 link spacing. The 2 link spacing provides twice as many cross chains for superior traction at an economical price.

Visit www.tirechainsrequired.com to view tire sizes and pricing.

Monday, November 19, 2007

Utah Tire Chain Regulations

41-6a-1636. Tires which are prohibited -- Regulatory powers of state transportation department -- Winter use of studs -- Special permits -- Tread depth.

(1) A solid rubber tire on a vehicle shall have rubber on its entire traction surface at least one inch thick above the edge of the flange of the entire periphery.
(2) A person may not operate or move on a highway a motor vehicle, trailer, or semitrailer having a metal tire in contact with the roadway.
(3) Except as otherwise provided in this section, a person may not have a tire on a vehicle that is moved on a highway that has on the tire's periphery a block, stud, flange, cleat, or spike or any other protuberances of any material other than rubber which projects beyond the tread of the traction surface of the tire.
(4) In accordance with Title 63, Chapter 46a, Utah Administrative Rulemaking Act, the Department of Transportation may make rules to permit the use of tires on a vehicle having protuberances other than rubber, if the department concludes that protuberances do not:
(a) damage the highway significantly; or
(b) constitute a hazard to life, health, or property.
(5) Notwithstanding any other provision of this section, a person may use:
(a) a tire with protuberances consisting of tungsten carbide studs on a vehicle if the studs:
(i) are only used during the winter periods of October fifteenth through December thirty-first and January first through March thirty-first of each year;
(ii) do not project beyond the tread of the traction surface of the tire more than .050 inches; and
(iii) are not used on a vehicle with a maximum gross weight in excess of 9,000 pounds unless the vehicle is an emergency vehicle or school bus;
(b) farm machinery with tires having protuberances which will not injure the highway; and
(c) tire chains of reasonable proportions on a vehicle when required for safety because of snow, ice, or other conditions tending to cause a vehicle to skid.
(6) Notwithstanding any other provision of this chapter, a highway authority, for a highway under its jurisdiction, may issue special permits authorizing the operation on a highway of:
(a) farm tractors;
(b) other farm machinery; or
(c) traction engines or tractors having movable tracks with transverse corrugations on the periphery of the movable tracks.
(7) (a) A person may not operate a vehicle if one or more of the tires in use on the vehicle:
(i) is in an unsafe operating condition; or
(ii) has a tread depth less than 2/32 inch measured in any two adjacent tread grooves at three equally spaced intervals around the circumference of the tire.
(b) The measurement under Subsection (7)(a) may not be made at the location of any tread wear indicator, tie bar, hump, or fillet.
(8) A person in the business of selling tires may not sell or offer for sale for highway use any tire prohibited for use under Subsection (7).

Renumbered and Amended by Chapter 2, 2005 General Session

For more information see Full Copy of Text here

Order Tire Chains for your Vehicle at TireChainsRequired.com

Thursday, November 15, 2007

Washington Chain Regulations

The Washington State tire chain laws are specific and complicated. The numbers of tire chains truckers are required to carry depend on the number of drive axles. WADOT suggests giving Motor Carrier Services a call at 360-705-7987 about their chain up requirements. Trucks must carry tire chains from Nov. 1 to Apr.1 on certain routes.

Find further Washington State Chain Information at the official website at
www.wsdot.wa.gov

Find legal Tire Chains and Snow Chains for your state at TireChainsRequired.com

Monday, November 12, 2007

Tire Chain Standards

When selecting tire chains for your vehicle, make sure to check if the retailer is selling tire chains that meet N.A.C.M. (National Association of Chain Manufacturer)standards. This is a written standard by which chains are made to unsure the chains are of high quality. You can find a written copy of the current N.A.C.M. standard at www.nacm.info

You can also find tire chains that meet or exceed the N.A.C.M. standard at www.tirechainsrequired.com

Friday, November 9, 2007

Tire Chain Classifications

Tire Chain Classification and Use
Definition of SAE classification

SAE class S:
Regular, non-reinforced passenger tire chains and cables for vehicles with restricted wheel well clearances.

SAE class U:
Regular, non-reinforced and lug-reinforced passenger tire chains for vehicles with regular, non-restricted wheel well clearances.

SAE class W:
Passenger tire chains that use light truck components, as well as some light truck chains.

Find the right tire chains or snow chains for your application at
TireChainsRequired.com

They are the Traction Specialists.

Thursday, November 1, 2007

General Tire Chain Rules

• Consult your owner's manual to see if tire chains can be used on your vehicle.

• Make sure chains are properly sized for your tire. Proper fit is very important.

• Install as tightly as possible by hand for maximum chain life and performance.

• Pull completely off the road and out of the way of traffic before installing, servicing, or removing tire chains.

• Do not deflate tires to install tire chains. (Tires should be normal inflation.)

• Drive approximately 1/4 mile. Stop and retighten chains. Extra links (depending on chain style) may be cut off or zip tied.

• Do not exceed 30 miles per hour. Accelerate and decelerate slowly. Avoid spinning or locking of wheels.

• If chains should fail, stop immediately and repair or remove. Do not drive with a broken tire chain.

• Avoid hitting curbs with tire chains.

• Tire chains are not designed for towing.


The dimensions of tires may vary between manufacturers and tread design profiles. We recommend that you pre-fit your chains prior to use. These tire chains may be designed to fit the largest tire profile within the tire size designation. Pre-fitting the chains will ensure that the chains will fit the tire when you are ready to use them.

View Many Chain Options at
TireChainsRequired.com